|
9359 What is the maintenance recommendation for a hammer? When should I replace the grease on my rotary hammer?After a certain time the grease on the gaskets of the hammery system needs to be replaced to meet the high efficiency of your tool9515 How to fit the blade on a circular saw?Please refer to the user manual. Make sure the saw corresponds to the material you want to cut.10278 How to change a chuck?The chuck is fitted with a screw on the main shaft of the drill, left-threaded. You need to turn right to unscrew the chuck. It is recommended to use a new screw with a new chuck.10311 How to change a chuck?The chuck is fitted with a screw on the main shaft of the drill, left-threaded. You need to turn right to unscrew the chuck. It is recommended to use a new screw with a new chuck.10463 How to maintain a sander?To extend the life of the sander you need to clean it up by using air-compressor or blower.10619 What has to be observed when applying the planer to the workpiece?Ensure that the base of the planer is applied to the work surface to ensure there is no dent cut into the work surface. It is a good idea to practice a few times before using the planer.10723 What has to be observed when taking the planer off the workpiece?When taking the planer off the work surface ensure it has fully stopped before putting it down on a surface. Planers have a blade guard however be sure it is working properly. When the planer is taken off the planed material the operator pressure must be applied to the rear of the planer base, otherwise the result will be a dent in the surface. Practice makes perfect.
|
Position
|
Description (Qty)
|
Part number
|
|
Position
|
Description (Qty)
|
Part number
|
|
